Press "Enter" to skip to content

Which Coaxial Speaker Cable Is Right For You?

Whether you’re buying a new sound system or just need some new speaker wire, finding the proper speaker cable can be a tricky business! This article will help you make the right decision for your needs.

What is a Coaxial Speaker Cable?

A coaxial speaker cable is a type of audio cable that uses coaxial cable as the conductor. Coaxial cables are often used in home theater and music systems because they produce better sound quality than other types of audio cables.

When you buy a coaxial speaker cable, you need to decide which type of connector it will use. There are three types of connectors: RCA, TOSlink, and XLR. RCA connectors are the most common, but they’re also the least expensive. TOSlink connectors are more expensive but have better sound quality than RCA connectors. XLR connectors are the best quality and cost the most money, but they’re also the most difficult to use.

Definition of Terms

There are several factors to consider when selecting coaxial speaker cable. The type of music you listen to, the size of your speakers, and your budget are all key factors in determining which coaxial speaker cable is right for you. Here’s a definition of some key terms:

Type: Coaxial speaker cable is made up of two thin wires that run inside a metal or plastic tube. This type of cable is typically used with smaller speakers, since it doesn’t require as much power to drive them. The downside to coaxial speaker cables is that they can be more difficult to install than other types of speaker cables.

Size: Coaxial speaker cables come in different sizes depending on their wattage rating. The smaller the number, the lower the wattage rating. For example, a 6-foot-long 3-watt coaxial speaker cable would be less powerful than a 12-foot-long 10-watt coaxial speaker cable.

Wattage Rating: The wattage rating tells you how powerful the amplifier will need to be in order to drive the speakers with this particular type of cable. For example, a 3-watt coaxial speaker cable will need an amplifier with at least 3 watts of power in order to work properly.

How to Identify the Types of Coax Elements

There are a few things to consider when choosing coaxial speaker cable. The type of connector, the gauge of wire, and the quality of plating on the conductors are all key factors.

Connector Type: There are three types of connectors used for coaxial speaker cables: banana plugs, spades, and Phillips screws.

Gauge of Wire: Coaxial speaker cable is often made with a thicker gauge wire than other types of audio cables. This makes it more resistant to interference and better able to carry high-volume audio signals.

Plating: The plating on the conductor is also important. Coaxial speaker cables are typically gold-plated to increase signal strength and prevent corrosion.

Overview of Wire Gauge and Shielding

Which coaxial speaker cable is right for you? When shopping for coaxial speaker cable, there are a few things to keep in mind. The first is wire gauge. The smaller the wire gauge, the higher the voltage will be and the more power your speakers will require to operate. Second is shielding. Coaxial speaker cable with good shielding will help to minimize interference and promote fidelity. Finally, make sure you get a cable that matches the size of your speakers.

Different Types of Coaxials

There are a few different types of coaxial speaker cables, each with its own advantages and disadvantages.

Plenum-rated cables are designed to work in areas with high levels of environmental noise, such as factories. They’re also less likely to experience interference from other electronic devices.

Conductive rubber insulation (CR) is a type of coaxial cable that uses a metal conductor in the insulation instead of rubber. CR cables are more resistant to interference and can handle higher volumes than other types of coaxial cable. However, they can be more expensive than other types of cables.

 stranded copper wire is the most common type of coaxial cable used in home audio systems. It’s inexpensive and easy to install, but it doesn’t work well at high volumes or with strong electrical interference.


If you’re looking to upgrade your sound system, it’s important to consider the type of coaxial speaker cable that is best for your needs. In this article, we will discuss the different types of coaxial speaker cables and their respective benefits and disadvantages. After reading this article, hopefully you will have a better understanding of what factors you should consider when choosing a coaxial speaker cable and be able to make an informed purchase.